DIYmall VK-172 VK 172 Gmouse G-Mouse USB GPS Dongle Glonass Support Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker (Pack of 1pc)

Price: $32.98 - $12.99
(as of Feb 25, 2024 23:19:12 UTC – Details)

Product Description

NOTE:

> The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data

> It can work with windows, linux system, but it can not work with IOS system

> As the ceramic antenna is not big enough, the module can not get good signal indoor, please try it outdoor or install a signal booster in your room or office

How to install driver on windows 10? After plugging in the device, let it do its thing installing a basic driver.

Description:

> Support Windows Andorid Linux sytem, Raspberry PIand EMGRAND car

> VK-172 automatically adapt the baud rate, the baud rate has any data output

> Support Google Earth

Electrical properties:

Tracking sensitivity:-162dBm Acquisition sensitivity:-160dBm Acquisition sensitivity:-160dBm Cold Start Time: 29s(average) Warm start time:28s(average) Hot start time: 1s(average) Recapture Time: 0.1s (average)

Model
DY-180TTL VK-172 G28U7FTTL G72 DY-220TTL DY-880TTL

Chip
M8030-KT G7020-KT G7020-KT M8130-KT M8030-KT M8030-KT

Port
PH1.0mm 4P USB 6Pin 1.25mm socket USB 4Pin 1.0mm Pitch PH1.25mm 6P

Frequency
GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 L1, 1575.42MHz L1, 1575.42MHz GPS L1, 1575.42MHz/BEIDOU B1, 1561MHZ/GLONASS G1, 1602MHZ GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1

Channel
72CH 56CH 56CH 72CH 72CH 72CH

Baud rate
4800bps-921600bps (default 9600bps) 4800bps-921600bps (default 9600bps) 4800bps-921600bps (default 9600bps) 4800bps-921600bps (default 9600bps) 4800bps-921600bps (default 9600bps) 4800bps-921600bps (default 9600bps)

Output level
TTL level USB level TTL level USB level TTL level TTL level

Output Protocol
NMEA-0183 NMEA0183 Standard Protocol NMEA0183 Standard Protocol NMEA0183 Standard Protocol NMEA0183 Standard Protocol NMEA0183 Standard Protocol

Update frequency
1-10 Hz (default 1Hz) 1-10 Hz (default 1Hz) 1-10 Hz (default 1Hz) 1-10 Hz (default 1Hz) 1-10 Hz (default 1Hz) 1-10 Hz (default 1Hz)

Module
ESP32-WROOM-32 ESP32-S2-WROVER ESP32-C3-MINI-1 ESP32-C3-WROOM-02

WiFi

✓

✓

✓

✓

✓

✓

Bluetooth

✓

✓

✓

✓

✓

Flash
4MB 4MB 4MB 4MB 4MB 4MB

PSRAM
2MB

Antenna
PCB PCB PCB PCB PCB PCB

RGB LED

✓

✓

✓

USB interface
Micro USB Micro USB Micro USB Micro USB Micro USB

Power Supply
3.3V/5V 3.3V 3.3V/5V 3.3V/5V 3.3V/5V 3.3V/5V

Chip
ESP32-PICO-D4 ESP8266

NEW PRODUCT
DIYmall Led Car Sign Display Smart-APP Control Flexible LED Matrix Panel, Addressable Scrolling Message Soft Screen for Shop, Bar, Hotel, Cinemas, Concert, 14.6” x 3.6” DIYmall ESP32-S3-DevKitM-1-N8 Development Board ESP32-S3-MINI-1 Wi-Fi+BT+BLE Module 8MB Flash ESP32-S3FN8 Chip PCB Antenna DIYmall DEVIT V1 ESP32-WROOM-32 Development Board, 36Pins ESP32, ESP-32S 2.4GHz WiFi+BT Dev Module CP2102 for Arduino DOIT, with ESP32 Expansion Board DIYmall ESP32 Expansion Board, ESP32-IO Sensor Expansion Shield for DOIT DEVIT V1 ESP32-WROOM-32 ESP32 Development Board

Raspberry pi and linux no need driver.
The default output is the product GPs protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
Note: This dongle only can work outdoor. If you want to let it work indoor, you need have GPS amplifier. Otherwise the GPS can not lock.
If you need some driver links and using videos for VK-172,Please contact us.